Gives excellent outside durability and resistance to yellowing. Range of Polyester Powder Coatings is formulated on selected resins and light-fast pigments to give outstanding durability and is designed to customer requirements.


Application Areas

Reference No’s

  •   TLP – G Polyster Gloss
  •   TLP – S Polyster Semi Gloss
  •   TLP – M Polyster Matt

Curing Schedules

  •   10 min at 180°C metal temp
  •   5 min at 200°C metal temp

Coating Thickness

  •   Minimum – 35 microns
  •   Preferred – 55 microns
  •   Maximum – 65 microns

Coating Properties

  • Test Panels, 50 microns thickness applied to light weight zinc phosphated steel

Antibacterial Powders

Particle Size

  •   100% below 90 microns

Shelf Life

  •   12 months from date of manufacture

Specific Gravity

  •   1.4 – 1.8 depending on colour & finish


  •   Store below 25°C in dry conditions

Architectural Powders


Epoxy Powders

Epoxy Polyester Powders

Physical Properties

Flexibility BS3900 6mm Pass
Scratch BS3900 E2 4kg
Impact BS1391 Pass
Direct 80 in lbs Pass
Reverse 80 in lbs Pass
Erichsen Cupping BS3900 E4 6mm Pass
Cross Hatch BS3900 E6 100% Pass

Environmental Properties

Humidity resistance BS3900 F2 Pass 1000 hours
Salt Spray resistance ASTM B117 Pass 1000 hours
Water resistance BS3900 G2 Pass 1000 hours

Nylon Modified Powders

Post Forming Powders

Speciality Powders


  • Suitable for application by or automatic discharge equipment and triboelectric charging guns.


  • It is essential to ensure that the surface to be coated is free from dust or rust or scale and also oil, etc. Chemical pre-treatment of the substrate is essential to increase the long term corrosion resistance. Further information is given in our publication ‘Application of Polyester Powder Coatings’.

Boiling Water Resistance

  • No blistering after 50 hours.

Detergent Resistance

  • No blistering afer 50 hours in 2% boiling tide.

Solvent & Chemical Resistance

  • Good resistance to acids, alkalis and solvents at room temperature. May be attacked by diluted nitric acid, ketones and trichioroetylene.

Exterior Durability

  • BS3900 Part F2 excellent. Minimal loss of gloss or colour change after 2000 hours.

Health & Safety

  • Use in accordance with the Code of Safe Practice published by the Paintmakers Association of Great Britain, “Application of Powder Coatings Electrostatic Spraying”. Copies are available on request. To prevent inhalation of airborne powder, face masks capable of removing respirable dust should be worn. Skin contact should be avoided and any deposited powder removed with soapy water. Some powders, mainly bright red and yellow shades, contain lead chrome and cadmium pigments. Further information is given in our Health and Safety Sheet.


  • Our data sheets and sales literature are issued for the purpose of supplying general product information. In view of the variation of conditions under which products may be used or this information may be applied, we cannot accept responsibility for loss, damage or accident of any nature [or infringement of patent rights] which may result from the use of application of the information or the products. For specific confirmation of any details in the product information or use and application please apply to the company in writing.